Manillar HIGHSIDER pro Cross MX2 acero - cromado

Manillares de acero HIGHSIDER pro Cross MX2, cromados.

HIGHSIDER pro steel handlebars 22.0mm
Classic enduro handlebars with cross brace. Handlebars of the 70s as they were obligatory on an XT 500 or other enduro bikes of the time.

HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.
The steel handlebars with an outer diameter of 22.0 mm are particularly suitable for use on youngtimers of German and Italian manufacture, as they also had original handlebars with a diameter of 22.0 mm.
The handlebars of some later BMW and Ducati models also had this metric measurement.
The wall thickness of the steel handlebars is 2 mm (inside 18 mm). The surface is high-gloss polished and chrome-plated or black KTL-coated.
The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template in order to adopt the position of the holes from the standard handlebars in the best possible way.
The 22.0 mm handlebars are supplied with a parts certificate. The parts certificate lists a few vehicle types as examples, but it can be used on many more vehicles, not all of which we were able to list.
The parts certificate then serves the expert as a sound basis for the individual approval and registration of the handlebars in the vehicle documents.

Scope of delivery: 1 piece

Care instructions:
- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. immediately absorb any dripping with a soft cloth.
- Test the compatibility of cleaning agents on an inconspicuous area before use!
- No guarantee or warranty in the event of improper cleaning and care.